Melody 25A will play a music when all the setting is ready to go, so all users do not need to worry about whether their

speed controller is ready to go or not when the power been connected.

1.          Melody 25A is suitable for: Ni-CD/Ni-MH 6 ~ 12 cell
                               Li-ion/ Li-Polymer 2 ~ 4 cell

2.          Melody 25A has programmed for soft start.

3.          When battery voltage drops to the pre-set (60%) level (could be set at 50%), the motor output decreased gradually instead of a sudden-stop.

            This low battery warning function allows an early safe landing on R/C aircraft.

4.          It has start and over heat protection function.

5.          Automatic Throttle adjustment for using on every transmitter.

6.          Brake or Non-brake.

7.          8 selectable- ready to go- melody. (need select by program card)

8.          Melody 25A has program card setting or manual setting function.

9.          The program can be upgrade when there is new program available. (need contact Dreamfly-RC.uk, Bunkyo-RC.my or your local dealer)

10.      The motor will decrease its power to full stop if the receiver is out of the control range. Back to the receiving range the motor power will be resumed.

Technical specs:

Maximum load (in 30 seconds) 35A., for constant use: 25A

Working voltage: Ni-CD / Ni-MH ----- 6 to 12 cell (6-15V)

                          Li-ion / Li-polymer ----- 2 to 4 cell (6-15V)

Working temperature:  0C ~ 50C

Size : 41X25X11.5m/m
Weight : 25g
Maximum RPM: 2-pole motor / 210,000 rpm
6-pole motor / 70,000 rpm
12-pole motor / 35,000 rpm